Schaerer Ambiente 2 Service Manual

Chapter 4 Fault diagnosis
108 SMSO-2-02.04- 15.07.03
Incorrect grinding degree
System / component Possible cause Remedy
Grinder  Grinding degree too fine  Adjust grinding degree (see “Mainte-
nance, Setting the Grinding Degree”)
 Grinder blade worn  Replace grinder blades (see “Mainte-
nance, dismantle/replace grinder
blades”)
 Grinder blade loose, not centred  tighten or replace the grinder blades
(see “Maintenance, dismantle/replace
grinder blades”)
 Ejector on rotor worn out  Replace the grinder as a complete unit
 Grinding degree disk loose or worm gear
raster defective
 Fit the grinding degree disk correctly.
 Check, install and adjust the worm gear
and housing.
 Adjust grinding degree (see “Mainte-
nance, Setting the Grinding Degree”)
 Rotor bearing defective  Replace the grinder as a complete unit

Schaerer Ambiente 2 Specifications

General

Brand	Schaerer
Model	Ambiente 2
Category	Coffee Maker
Language	English