Schenck process Intecont Satus - Page 59

O 11 Error external Event E6
The event class is fixed at ALARM
The event E6 is set when the external digital input (parameter P06) is set.
O 15 Dongle fault S5
Range: ALARM
WARNING 1
WARNING 2
IGNORE
Original value: WARNING 2
The dongle (memory for calibrating data) is missing or is defective. Refer to connecting the
load cells
Note:
INTECONT Satus is fully functional even without a dongle since the parameters are also
internally stored.
INTECONT® Satus Operating Manual BV-H2346GB / 0833 53
© Schenck Process