Schiller PHYSIOGARD Touch 7 - Page 111

Page 111
Main Menu 9
User guide General setup 9.1
Art. no.: 0-48-0227 Rev.: g
DEFIGARD/PHYSIOGARD Touch 7
• Software update
– Update from USB
– Search on server
– Current version informa-
tion
Exiting “ Control panel menu”
only by switching off the device
possible.
• Maintenance
– Safety cell replaced
– RFID Flasher
– RFID Tag info
– Export log to USB
– Format log file
– Format memory
– Start auto test
Once the safety cell has been
changed, press this button.
Manual start of the Auto Test
Exiting “ Control panel menu”
only by switching off the device
possible.
• Ethernet config.
– DHCP ON/OFF
– Radius ON/OFF
If set to OFF:
IP address
Netmask
Gateway
DNS1-3 Server
If DHCP is set to ON
• Check connectivities
– Check SEMA
connectivities
– Check SUS connectivities
Select one of the desired
communication channels GSM/
3G or Wi-Fi for checking.
 Activates the connectivity
check for SEMA
 Activates the connectivity
check for SUS
Language
• List of available languages
Select the desired language for
the current use.
The language setting here is
only for the current use. Once
the device is switched off, it
will use again the default
configuration.
Menu Sub-menu/Parameter Description Note