Page 155
Technical Data 12
User guide Device Configuration 12.6
Art. no.: 0-48-0227 Rev.: g
DEFIGARD/PHYSIOGARD Touch 7
12.6.21 SUS (Schiller Update server)
SEMA login -
Sets device login to SEMA. To be able to transmit data to SEMA, a
login and password must be specified for each device (it can be the
same login/password for all device though)
SEMA password -
Sets device password to SEMA. To be able to transmit data to SEMA,
a login and password must be specified for each device (it can be the
same login/password for all device though)
SEMA Attending
name
-
Sets Technician ID. This field is only necessary if Multi-tenancy is used
in SEMA in order to split recordings belonging. Typically the Attending
name is a specific login in SEMA Server
Parameter Values Description
SUS server -
Sets either the IP address or the hostname of the SUS Server
Should the device be able to update itself over Internet (typically
through GSM), the public IP address or hostname must be specified
and not the private
Example: 188.165.287.137
(public IP) and not 192.168.200.32 (private IP)
SUS server port 8181
Sets the port with which SUS Server is accessible. This port might be
different whether the device tries to connect with or without SSL
encryption
Example: By default, 8080 is used for HTTP and 8181 is used for
HTTPS
SUS SSL
encryption
•False
•True*
Sets SSL encryption. It's recommended to activate this option to
secure the communication, especially if transmission are done over the
Internet
SUS login -
Sets device login to SUS. To be able to retrieve data from SUS, a login
and password must be specified for each device (it can be the same
login/password for all device though)
SUS password -
Sets device password to SUS. To be able to retrieve data from SUS, a
login and password must be specified for each device (it can be the
same login/password for all device though)
Parameter Values Description
To Next Page
Loading...
