Schleifenbauer PDU - Sensors - Tab


SENSORS – TAB




name
By default, the name field has an 8 character limit. With the “extended name”-option enabled,
you can make use of 18 characters.
➢ See also chapter: System tab > Settings

type
Shows the type of sensor. This is auto detected
➢ See also chapter: Operating the PDU > description of display screens > Sensor page(s)

G3 devices - equipped with an USB port - can handle two dry switch contacts (see example above)
value
Shows the actual sensor value


 


Page 26 of 54
V252_User manual
Schleifenbauer PDU
