Schleifenbauer PDU - Layout of this Manual


LAYOUT OF THIS MANUAL
This manual is split in three sections. You can focus on the section that fulfills your need when installing, operating and/or
managing the PDU.

The “How to....” section is meant to guide you directly to a solution for a problem you are faced with. It is not necessary to
read the complete manual.

Part I
Installation manual
Prepare PDU for use:

● safety issues
● mounting the PDU
● cabling the PDU

Part II
User manual
Operator and user part:

● operating/read out via the PDU-display
● operating/read out via the web interface
● problem solving

Part III
Administrator manual
Admin part:

● configure via the web interface
● set up via the web interface
● problem solving

Part IV
Problem Solving
In this chapter you can find the frequently asked questions
(FAQs)

WHAT’S NEW
● Firmware upgrade via USB port
● Near zero cross switching of outlet relays
● Support for 54 metered and/or switched outlets
● Voltage drop alert is now based on the input line voltage rather than a fixed value for 120 and 230 Volt operation.









Page 4 of 54
V252_User manual
Schleifenbauer PDU
