CLEANING
The PDU may only be cleaned by wiping off the outside with a clean dry cloth.
CONTENTS OF THE PACKAGE
The Schleifenbauer Intelligent PDUs are shipped in a cardboard box. Where applicable, dispose the packaging material in a
responsible manner, in accordance with local regulations. All of the materials used for packaging can be recycled.
Immediately after receipt, check whether you have received all of the goods.
The following items are delivered for each PDU:
● fixing materials: these can be attached to the PDU (19’’ or table-mounting brackets), or are delivered separately if
they have been ordered separately;
● the installation manual (1 per shipment);
Please note that the PDU User Manual can be found online at http://schleifenbauer.eu
ADDITIONALLY NEEDED TOOLS
The following tools are needed to install the PDUs:
● cage-nuts with bolts and washers
● suitable screwdriver.
MOUNTING THE PDU IN CABINETS
How to mount a PDU horizontally (19 inch)?
Each 19’’ rack bracket of a PDU has holes for horizontal mounting in 19” racks. The holes are
positioned so that an appropriate fixing hole is always available for a PDU with a profile height of
1.5 U. Using one or two of the 4 holes allows mounting without wasting space.
To Next Page
Loading...