EasyManua.ls Logo

Schleifenbauer PDU - How to Prevent Data Losses Because of Cable Cuts?...Ring Redundancy

Default Icon
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to prevent data losses because of cable cuts? ...ring redundancy
Normally the advantage of an IP solution per PDU is that a cable cut will not affect the other PDUs on the bus. This
could happen in a normal daisy chained serial bus topology.
However, Schleifenbauer has made their bus redundant so that a single cable cut will not affect the readout or
control of the PDUs; it will try and get access via the alternative route on the ring. A cable cut is detected by our
firmware and an error message will be submitted to the database. The disadvantage of a serial bus topology is
therefore covered in the Schleifenbauer system.
See Part I “How to connect a databus” on the PDU
Page 49 of 54
V252_User manual
Schleifenbauer PDU

Table of Contents