INTRODUCTION
POWER DISTRIBUTION MEETS INTELLIGENCE
The Schleifenbauer Intelligent Power Distribution Unit (PDU) is designed to distribute power for many years and without
problems. It is equipped with a Schleifenbauer databus which makes it possible to read and manage many PDUs with a
single IP address. An ethernet port was added to the individual PDUs so that alongside the advantages of a databus, a
whole range of new options has become available.
Schleifenbauer PDUs bring together or merges the interests between IT and infrastructures, making it a real bridge builder.
The PDU may contain:
● metered outlets
● switched outlets
● metered and switched outlets
● passive outlets
Monitoring capabilities will be described in detail within this manual in coming sections.
INTERFACES
In the Admin part of this manual you will find information about the “Interfaces” with which we mean the technology to
communicate via your LAN with the Schleifenbauer databus. There are several possibilities:
● (embedded) web interface
(Simple Network Management Protocol)
(Schleifenbauer Products Application Programming Interface)
ACCESSORIES
The following accessories can be purchased from Schleifenbauer, additionally. Please check the Installation Section for
more details regarding mounting brackets.
● C14/C20 plugs if C13/C19 outputs are used
● Different types of attachment brackets
o 19” rack mounting brackets
o Tabletop mounting brackets
o Mounting plates for sunken installation
o Profile clamps
o Toolless Mounts
● Customer Specific solutions related tools
Please check www.schleifenbauer.eu for further details regarding the accessories.
V252_User manual
Schleifenbauer PDU
To Next Page
Loading...