To Next PageTo Next Page
Need help?Do you have a question about the Seabreeze SHE9H4ZIGX and is the answer not in the manual?
Explains how the outdoor unit drives indoor units, detailing control methods.
Details how many and which indoor units can be connected to specific outdoor units.
Provides general warnings and specific guidelines for installing indoor units.
Specifies clearance and mounting dimensions for wall-mounted indoor units.
General warnings and specific clearance requirements for outdoor unit placement.
Clearance requirements for dual, triple, and quad port outdoor units.
Clearance requirements for the five-port outdoor unit.
Specifies maximum allowed lengths and height differences for refrigerant lines.
Details required tubing sizes and adapters for indoor and outdoor unit connections.
Covers general warnings, torque tables for flare nuts, and bundling procedures.
General warnings and wiring connection procedures for outdoor units.
Wiring connection steps for dual, triple, and quad port outdoor units.
Wiring connection steps for five port outdoor units.
Procedures for leak testing and vacuum purging the system.
Steps for preparing, performing operational tests, and checking temperature differentials.
Explains the operation of COOL, DRY, FAN, and HEAT modes for the system.
Details the operational parameters and logic for the cooling mode.
Describes the operation of the system in dry mode.
Explains the fan-only operation mode.
Details the operational parameters and logic for the heating mode.
Lists and explains various protection mechanisms and their error codes (E7, E8, H3, etc.).
Describes the error code for conflicting indoor unit operating modes.
Explains overload protection mechanisms and their error code.
Details compressor overload protection and its error code.
Describes communication errors between indoor and outdoor units.
Explains IPM protection and its error code.
Details compressor overpressure protection and its error code.
Describes compressor phase protection and its error code.
Lists error codes displayed on the indoor unit panel and their meanings.
Explains how to interpret flash codes on the outdoor unit's PC board.
Troubleshooting flowchart for jumper failure issues.
Troubleshooting steps for high-pressure protection errors.
Troubleshooting steps for anti-freezing protection.
Troubleshooting steps for low-pressure protection.
Troubleshooting steps for exhaust temperature protection.
Troubleshooting steps for over-current protection.
Troubleshooting for communication malfunctions.
Troubleshooting for overload protection issues.
Troubleshooting for condensate water full errors in indoor units.
Troubleshooting for various temperature sensor failures.
Troubleshooting for compressor overload protection.
Troubleshooting for IPM protection issues.
Troubleshooting for indoor fan motor failures.
Troubleshooting for compressor desynchronization.
Troubleshooting for PFC protection.
Troubleshooting steps for startup failures.
Troubleshooting for capacitor charging circuit errors.
Troubleshooting for indoor fan motor zero-cross detecting errors.
Step-by-step instructions for disassembling outdoor units.
Detailed disassembly steps for the dual port outdoor unit.
Detailed disassembly steps for triple/quad port outdoor units.
Detailed disassembly steps for the five port outdoor unit.
Step-by-step instructions for disassembling various indoor units.
Detailed disassembly steps for wall-mounted indoor units.
Detailed disassembly steps for console indoor units.
Detailed disassembly steps for cassette indoor units.
Detailed disassembly steps for floor/ceiling indoor units.
Detailed disassembly steps for ducted indoor units.
Technical specifications for various types of indoor units.
Specifications for Wall Mounted A indoor units.
Specifications for Wall Mounted B indoor units.
Specifications for Console indoor units.
Specifications for Cassette indoor units.
Specifications for Floor/Ceiling indoor units.
Specifications for Ducted indoor units.
Technical specifications for various types of outdoor units.
Specifications for the Dual Port outdoor unit.
Specifications for the Triple Port outdoor unit.
Specifications for the Quad Port outdoor unit.
Specifications for the Five Port outdoor unit.
Table of resistance values for ambient temperature sensors at various temperatures.
Table of resistance values for tube temperature sensors at various temperatures.
Table of resistance values for exhaust temperature sensors at various temperatures.
Tables and charts showing pressure readings for cooling and heating modes.
General| Brand | Seabreeze |
|---|---|
| Model | SHE9H4ZIGX |
| Category | Air Conditioner |
| Language | English |
