© 2014 SeaStar Solutions Optimus Installation Manual, Rev. E
8-4
5. Verify proper shift and throttle response for all control handles.
Check that all shift and throttle levers operate freely and cause
the engines to shift accordingly. Put the engines in neutral
idle mode and confirm that the throttle responds correctly and
returns to idle.
6. Verify that no alarms or warnings are shown on the CANtrak
display.
If any warnings are found, follow the instructions on the CANtrak
screen before proceeding.
Read the System Inspection steps on the CANtrak display and
acknowledge them by pressing the right hand most button
under OK.
7. Verify that installation checks have been performed per
Section 8.1.
To Next Page
Loading...