SeaSTAR OPTIMUM EPS - PCM and Power Steering Pumps

© 2014 SeaStar Solutions Optimus Installation Manual, Rev. E
5-7
5.3 PCM and Power Steering Pumps
PCM and the power steering pumps must be mounted in close
proximity. The three foot harnesses on the pumps need to reach the
appropriate connectors on the PCM without strain, and they cannot
be extended.
•
We recommend that you use only stainless steel mounting hardware.
• Fastenatallthreemountingpoints.
•
The PCM is designed to fit ¼” or M6 cap screws or machine screws.
Use washers between the screw head and the PCM.
• Through-boltwithnutsandwashersonthebacktheside,ordrill
and tap into a metal mounting surface.
• Youcanalsousea#14woodscrewandwasher.
5.3.1 PCM Recommended Mounting Hardware
PORT PUMP CONNECTION (M1)
STARBOARD PUMP
CONNECTION (M2)
CAN1
CAN1
CAN3
CAN2
Figure 5-7.
Single Engine Applications:
The power steering pump must
be plugged in to the port pump
connection (M1).