SeaSTAR OPTIMUM EPS - Required Parts

© 2014 SeaStar Solutions Optimus Installation Manual, Rev. E
4-2
4.2 Required Parts
Other parts required (not shown):
• SeaStarProSteeringHoses
• SeaStarElectronicPowerSteeringFluid(Green/bluecolor)
• DealerInstallationKitandPurgeHose
• Electricalharnessesandwire(s)(somewire[s]notsuppliedby
SeaStar Solutions)
•
Breakers – two 60 Amp (not supplied by SeaStar Solutions)
• Steeringwheel(notsuppliedby SeaStar Solutions )
SmartCylinder
One per engine (single/twin)
or engine pair (triple/quad)
Pump Control Module (PCM)
One PCM is required
Helm
One per helm station
CANtrak Display
One per helm station
Power steering pump
One per engine (single/twin)
or engine pair (triple/quad)
Check that following parts are available for the installation:
Figure 4-1.