STEERING SYSTEM
12 - 6
Steering Column disassembly
First remove the screen panel plastic cover and the upper
inner fl ap FL. For specifi c removal steps, see the vehicle
disassembly chapter.
【A】Steering spherical block
【B】Ball block locking plate
【C】EPS joint assembly
【D】 EPS steering rod assembly
【E】Bolt M8×16
【F】Bolt M8×30
◆ Remove two hexagon fl ange bolts M8×16【E】
◆ Remove the ball block locking plate【B】and the
ball block【A】
◆ Pull out the EPS steering rod assembly【D】
◆ Remove two hexagon flange bolts (half thread)
M8×30【F】
◆ Pull out EPS joint assembly【C】
!
If the position of the locking bolt, shown in the left
fi gure as 【G】& 【H】is not aligned, the bolt may be
damaged and the handlebar direction will be incorrect.
Bolt M8×16/bolt M8×30 Torque
35N.m（3.6kgf·m，25.8ft·lb）
G
H
2
A
A
3
C
B
E
F
D
To Next Page
Loading...
