1 - 5
Operation method
Push
button
Lamp
Effective mode
Auto. Manual
Use
Name
Group
No.
[12]
[14]
[15]
[16]
Safety check
Override
Feedrate
override
switches
Spindle
override
switches
TOOL LENGTH... Measures and
stores the length of the tool used for
an actual machining program.
COLLATION... Sets the Z axis to a
machine lock state, operates the
machine with an actual machining
program and checks whether there
is an interference between the
workpiece and tool when Z axis
approaches.
MEMORY... Memorizes optimum
override values (feed rate, spindle
speed) found in trial cutting, etc.,
making them corresponding to the
tools used.
AUTO. ... The override values
memorized are automatically input
to a program.
These push button switches apply
an override (ranging from 0 to
200%) to a feed rate in automatic
(cycle) operation. During a canned
cycle for tapping, the override is
ignored, resulting in 100%.
These push button switches apply
an override (ranging from 50 to
150%) to a spindle speed command.
O
O
O
O
O
O
O
O
O
O
O
O
O
OO
(Rotary switch)
(Rotary switch)
To Next Page