| 3 - User manual
Placing on a stand
The thread is suitable for mounting on a standard microphone stand with 3/8" or 5/8"
thread.
Handle with care: The antenna contains electrical components.
CAUTION
Personal injury and damage to property if the antennae should
tip or fall over
If you do not secure the antennae against tipping or falling over, they may
cause personal injury and damage to property.
Secure antennae so that they cannot tip and fall over. Use safety
wires for this purpose. The safety wires, rope terminations and
coupling links must comply in their dimensioning and condition
with the regulations and standards of the country in which they
are used!
100
To Next Page
Loading...
