| 3 - User manual
Connecting earphones
You have to set up an audio link in LinkDesk or Spectera WebUI.
CAUTION
Danger due to high volume levels
Volume levels that are too high may damage your hearing.
Turn down the volume of the headphone output before you put on
the headphone.
To connect earphones to the SEK:
Turn down the volume.
The volume can be altered between -100 dB to +27.5 dB in steps of 0.5 dB.
Insert the cableās 3.5 mm jack plug into the phones socket on the SEK.
The earphones have been connected.
80
To Next Page
Loading...
