| 3 - User manual
Updating the firmware
You can update the firmware for the L 6000 charger using the Sennheiser Wireless Systems
Manager (WSM) software.
To do so, connect the L 6000 charger to a network (see Connecting the L 6000 to a
network) and establish the connection with the WSM software.
For more information about controlling devices via the Sennheiser
Wireless Systems Manager (WSM) software, refer to the instruction
manual for the software. You can download the software here:
sennheiser.com/wsm
You can find the latest firmware on the Digital 6000 product page or in the
Sennheiser website’s download area:
sennheiser.com/digital-6000
sennheiser.com/download
137
To Next Page