| 3 - User manual
Base Station
Get started
General information for the System
Product overview
Installing slot-in cards
Connecting/disconnecting the Base Station to/from the power supply system
Connecting to a network
Connecting antennas
Antenna cable extension
Connecting word clock
Word clock scenarios for digital audio
Connecting audio via Dante®
Connecting audio via MADI
Changing the fan filter
Installing the Base Station in a rack
Switching the Base Station on and into standby
Activating a license
Using the headphone output
Meaning of the LED
Information on the display
Navigating the menu
Menu structure
Updating the Base Station
Get started
Get your Base Station ready to use in a few steps.
After unpacking the Base Station you must update the firmware before activating a licence.
If you use LinkDesk the update is mandatory before activating a licence.
24
To Next Page
Loading...
