| 3 - User manual
Connecting a charger in a network
You can monitor and control one or more chargers via a network connection using the
Sennheiser Wireless Systems Manager (WSM) or Sennheiser Control Cockpit (SCC)
software.
The network does not have to be a homogeneous network including only
chargers. You can integrate the charger into your existing network infrastructure
with any other types of devices.
You can integrate the devices into the network individually or cascade up to 5 chargers (see
Cascading chargers).
To reset the network settings to their factory defaults:
Hold the Reset button for 4 seconds.
111
To Next Page