Sennheiser SPECTERA - Updating the SEK

| 3 - User manual
Updating the SEK
You can update the firmware of the SEK via LinkDesk or Spectera WebUI.
All Spectera devices must use the same firmware version. The Base Station determines the
firmware version.
NOTICE
Data loss during firmware update
The audio transmission is interrupted during the firmware update of the
Base Station, the antenna or the mobile device.
After the firmware update, the device is restarted automatically.
Do not update the firmware during an active live audio
transmission.
To update the firmware:
If you want to update the SEK via LinkDesk: Updating firmware (mobile devices).
The Status LED is flashing green and red during the update.
If you want to update the SEK via Spectera WebUI: Updating firmware (mobile
devices).
The Status LED is flashing green and red during the update.
The firmware has been updated.
95