| 3 - User manual
Connecting/disconnecting the antenna
The cable supplies power and exchanges data.
Handle with care: The antenna contains electrical components.
The cable must
• be a CAT5e or higher,
• have ruggedized plugs and
• not extend 100 m (3937").
We recommend using a antenna cable cat 5e (see Accessories for the DAD).
To connect the antenna to the Base Station:
Observe the information: Information on antenna setup.
The antenna must be connected directly to the Base Station, with no
switch in between.
Plug on side of the cable into the antenna.
102
To Next Page