Sennheiser SPECTERA - Activating a License

| 3 - User manual
Activating a license
A license has to be activated, otherwise you cannot use the Base Station.
The license specifies the country-specific frequency ranges and the RF power.
You can activate a license via LinkDesk or Spectera WebUI.
Only one license per Base Station is possible.
To activate a license:
Connect the Base Station to the power supply, see Connecting/disconnecting the
Base Station to/from the power supply system.
Connect the Base Station to a network via a switch or router, see Connecting to a
network.
The Base Station needs a direct Internet access!
Connect a computer to the same switch or router.
If you want to activate a license via LinkDesk, follow the steps described here:
Activating license.
If you want to activate a license via Spectera WebUI, follow the steps described here:
Activating license.
Check the product page sennheiser.com/base-station for the latest firmware.
A license has been activated.
51