| 3 - User manual
Installing the Base Station in a rack
You can install the Base Station in any conventional 19" rack. The rack mounting angles are
already attached to the device.
Always observe the following information during rack mounting.
NOTICE
Material damages caused by devices overheating
When there is insufficient ventilation, the devices mounted in the rack
may overheat.
Ensure that there is sufficient ventilation in the rack, particularly
if several devices are installed.
If necessary, install a fan in the rack.
Support the Base Station after installation in the rack.
Due to the weight and depth of the device, there is a risk that it may break off in the
rack and become damaged as a result.
48
To Next Page
Loading...
