Sennheiser SPECTERA - Operating the L 6000 Via a Network

| 3 - User manual
Operating the L 6000 via a network
You can use the Sennheiser Wireless Systems Manager software to operate the charger via
a network connection.
To do so, connect the L 6000 charger to a network (see Connecting the L 6000 to a
network) and establish the connection with the WSM software.
For more information about controlling devices via the Sennheiser
Wireless Systems Manager (WSM) software, refer to the instruction
manual for the software. You can download the software here:
sennheiser.com/wsm
You can perform the following actions using WSM:
• Update the L 6000 charger firmware
• Prepare rechargeable batteries for storage (see Preparing rechargeable batteries for
storage (storage mode)).
138