3.4. HOW TO CONFIGURE SBF AND NMEA OUTPUT
Step 3: Configure NMEA bluetooth data reception on
secondary device
In this example, the NMEA data will be sent over bluetooth to a Getac tablet to provide
positioning information for an agricultural guidance application called MachineryGuide.
Figures 3-25 and 3-26 show how the MachineryGuide App can be configured to use NMEA
data from the AsteRs-U over bluetooth.
Figure 3-25: Select bluetooth for GPS positioning information
Figure 3-26: Find and pair the device to the AsteRx-U
30
To Next Page
Loading...
