4.3. HOW TO CONFIGURE THE ASTERX-U FOR
ATTITUDE
4.3 How to configure the AsteRx-U for
Attitude
With two antennas connected to the AsteRx-U, the receiver can calculate Heading and either
Pitch or Roll. This section details how to configure the AsteRx-U in a two-antenna setup.
Step 1: Connect a second antenna
Connect a second antenna to the rear-panel connector labelled AUX ANT and indicated in
Figure 4-24.
Figure 4-24: Auxiliary antenna connector on rear panel
48
To Next Page
Loading...
