Cautions DF-310E 7
2 Cautions
There are a number of warnings and cautions that must be observed to avoid
damage to the analyzer as well to insure the safety of its users. The analyzer
must be operated in a manner specified in this manual. Servomex cannot be
responsible for direct or consequential damages that result from installing or
operating the analyzer in a manner not described in this manual. Importantly,
the analyzer has been designed for use with inert, non-toxic, non-combustible
sample gases only. Servomex cannot be responsible for direct or
consequential damages that result from using the analyzer with these gases.
2.1 Symbols and Explanations
Following is a list of the various symbols used throughout this manual and
their definitions.
CAUTION
This symbol alerts the user to the presence of physically hazardous
conditions that may be dangerous to individuals or equipment.
NOTE
This symbol alerts the user to the presence of important operations
and/or maintenance information.
DANGER
This symbol alerts the user to the presence of caustic liquid. Refer
to the MSDS at the back of the manual for handling instructions.
2.2 Important Warnings
CAUTION
Do not setup or operate the Oxygen Analyzer without a complete
understanding of the instructions in this manual. Do not connect
this Analyzer to a power source until all signal and plumbing
connections are made.
CAUTION
This analyzer must be operated in a manner consistent with its
intended use and as specified in this manual.
To Next Page
Loading...
Need help?
General
