Read Me First…
Unpacking Procedure
Follow the procedure below to unpack your Process Oxygen Analyzer.
1. Examine the condition of the packaging and its contents. If any damage is apparent,
immediately notify the carrier and Servomex. Do not proceed with the installation.
2. Check the contents against the packing slip to make sure the shipment is complete.
Unattached equipment may be shipped with the analyzer in supplemental packaging.
Shortages should be reported to Servomex immediately.
3. All analyzers are shipped with the following:
Item Servomex Part
Number
One bottle of Hummingbird Brand Electrolyte Blue Electrolyte Blue
One bottle of Hummingbird Brand Replenishment
Solution
210515
Power Cord with 115VAC connector
NOTE - No power cord is supplied with 220 VAC or
DC powered units
210408
Instruction Manual 210450
4. Open the analyzer door, remove any shipping materials and verify that nothing has come
loose during transit.
5. Save the original container in the event you may need to ship the analyzer to another
location or back to the factory (see Shipping in the Service section).
Installation and Maintenance
The DF-310E Process Oxygen Analyzer will provide years of accurate and dependable service if
it is set up, operated and maintained properly. It is essential to make a careful and complete
installation as outlined in the Installation and Setup section of this manual.
Thank You
Thank you for selecting the model DF-310E Process Oxygen Analyzer. Servomex designs,
manufactures, exhaustively tests, and supports every analyzer under ISO-9001 control. You
should expect every Servomex analyzer to arrive in good working order and, with proper
maintenance, provide years of trouble-free service.
To Next Page
Loading...
Need help?
General
