SERVOPRO FID Online Total Hydrocarbons Analyser
SERVOPRO FID 01000001A rev:5 56
APPENDIX
A 2 SERIAL OUTPUT FORMAT
With this option installed, this analyser retransmits the operating parameters and
process values to a remote computer through a serial link. The computer is
connected to the analyser by the mean of a DB-9 RS-232C (Null-modem) cable.
The computer must have appropriate software to read the data transmitted by the
analyser. Any commercial software can be used to receive the data.
The communication parameters of the analyser are:
• Baud rate: 9600
• Parity bits: none
• Data bits: 8
• Stop bits: 1
The different parameters are transmitted in the following order:
To Next Page
Loading...
Need help?
General
