Shark MP200 - Page 45

Doc# E166703 2-13
2: MP200 Metering System Overview and Specifications
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
Isolation
All Inputs and Outputs are galvani-
cally isolated to 2500 V AC
Environmental Rating
Storage: (-20 to +70)
o
C/(-4 to +158)
o
F
Operating: (-20 to +60)
o
C/(-4 to +140)
o
F
Humidity: To 95% RH Non-condensing
Measurement Methods
Voltage, current: True RMS
Power: Sampling at over 400 samples per
cycle on each channel simultane-
ously
Update Rate
All parameters: Every 60 cycles (e.g., 1 s @ 60 Hz)
Communication
Standard:
1. RS485 port (Com 1)
2. USB port (Com 2)
3. RS485 (Com 3)
4. Energy pulse output LED for meter testing: there are 8 pulses, one for each of the
three phase loads of the MP200-Y; for the MP200-S, the test pulses are shared,
with one pulse for every three loads (see Chapter 6 for more details and instruc-
tions for using the Test pulses).