MX-M316N SIMULATION 6 – 30
26-56
Purpose
Setting
Function (Purpose)
Used to set ON/OFF of the Life Correction.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key. (The set value is saved.)
26-65
Purpose
Setting
Function (Purpose)
Used to set the finisher alarm mode.
Section
Operation/Procedure
Use the touch key to set.
26-69
Purpose
Setting
Function (Purpose)
Used to set the operating conditions for
toner near end.
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2 is saved.
Item/Display Content
Setting
range
Default
value
A AUTO1 Life correction of Auto 1 is
turned ON.
0 - 1 1 1 (ON)
Life correction of Auto 1 is
turned OFF.
0
B AUTO2 Life correction of Auto 2 is
turned ON.
0 - 1 1 1 (ON)
Life correction of Auto 2 is
turned OFF.
0
C TEXT Life correction of Text is
turned ON.
0 - 1 1 0 (OFF)
Life correction of Text is
turned OFF.
0
D TEXT/
PRINTED
PHOTO
Life correction of Text/Printed
Photo is turned ON.
0 - 1 1 0 (OFF)
Life correction of Text/Printed
Photo is turned OFF.
0
E TEXT/
PHOTO
Life correction of Text/
Photograph is turned ON.
0 - 1 1 0 (OFF)
Life correction of Text/
Photograph is turned OFF.
0
FPRINTED
PHOTO
Life correction of Printed
Photo is turned ON.
0 - 1 1 1 (ON)
Life correction of Printed
Photo is turned OFF.
0
GPHOTOG
RAPH
Life correction of Photograph
is turned ON.
0 - 1 1 1 (ON)
Life correction of Photograph
is turned OFF.
0
H MAP Life correction of Map is
turned ON.
0 - 1 1 0 (OFF)
Life correction of Map is
turned OFF.
0
Item
Set
value
Content
Setting
range
Default
value
NOTE
LIMIT
COPIES
ON Number of
sets of
stapling:
Max. 50 sets
ON or
OFF
ON
OFF Number of
sets of
stapling:
Not Limited
Item/Display Content
Setting
range
Default
value
ATONER
PREPARATION
(0:YES 1:NO)
0 The toner
preparation
message is
displayed.
0 - 1 0
1 The toner
preparation
message is not
displayed.
BREMAINING
TONER
LEVEL
5% 0 Toner
preparation at
remaining toner
level of 5%
0 - 9 4
10% 1 Toner
preparation at
remaining toner
level of 10%
15% 2 Toner
preparation at
remaining toner
level of 15%
20% 3 Toner
preparation at
remaining toner
level of 20%
25% 4 Toner
preparation at
remaining toner
level of 25%
30% 5 Toner
preparation at
remaining toner
level of 30%
35% 6 Toner
preparation at
remaining toner
level of 35%
40
%
7 Toner
preparation at
remaining toner
level of 40%
BREMAINING
TONER
LEVEL
45% 8 Toner
preparation at
remaining toner
level of 45%
0 - 9 4
50
%
9 Toner
preparation at
remaining toner
level of 50%
C TONER NEAR END
(0:YES 1:NO)
0 The toner near
end message is
displayed.
0 - 1 0
1 The toner near
end message is
not displayed.
D TONER END 1 Operation setup
1
1 - 3 -
2 Operation setup
2
3 Operation setup
3
To Next Page
Loading...
