MX-M316N DISASSEMBLY AND ASSEMBLY 10 – 6
1) Take out the fusing unit from the left side.
(2) Thermostat
1) Remove the thermostat cover.
1) Remove the harnesses of the heater lamp and remove the
thermostat.
(3) Thermistor
1) Remove the thermistor.
(4) Fusing PG
1) Remove the fusing PG.
1) When the fusing PG is fixed, check the position of the fusing
PG by seeing the scale on the fusing unit.
(5) Lower separation pawl
1) Remove the spring and remove the lower separation pawl.
To Next Page
Loading...
