ORIGINALS
CHECKING THE ORIGINAL SIZE
When an original size is set, the paper size that appears in the [Original] key is the paper size that is set in "Default Original
Size Settings" in the system settings (administrator). To change the original size to a different size from the size shown in the
[Original] key, touch the [Original] key and set the original size.
Example of base screen
The original size is displayed.
Standard original placement orientations
Place originals in the document feeder tray or on the document glass so that the top and bottom of the original are
oriented as shown in the illustration. For more information on placing the original, see "ORIGINALS"
(page 1-39) in
"1. BEFORE USING THE MACHINE".
To Next Page
Loading...
Need help?
General
