SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE (Enlarge/Reduce)
When an original size is set, the paper size that appears in the [Original] key is the paper size that is set in "Default
Original Size Settings" in the system settings (administrator).
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
In the above screen, the scan size (the placed original) is 8-1/2" x 11" (A4) and the send size is auto. For example, if the
scan size is 8-1/2" x 11" (A4) and the send size is 5-1/2" x 8-1/2" (B5), the image will be reduced before transmission.
When the original size is a non-standard size, or you wish to change the scan size, manually specify the original scan size.
☞ Specifying the original scan size (by paper size) (page 5-56)
☞ Specifying the original scan size (by numerical values) (page 5-57)
To Next Page
Loading...
Need help?
General
