Maximum Size of E-mail
Attachments (E-mail)
To prevent the transmission of excessively large image
files by Scan to E-mail, a file size limit can be set from
1 MB to 10 MB in increments of 1 MB. If the total size of
the image files created by scanning the original exceeds
the limit, the image files are discarded.
If you do not wish to set a limit, select [Unlimited].
Maximum Size of Data Attachments
(FTP/Desktop/Network Folder)
A limit can be set for the size of files that can be sent by
Scan to FTP, Scan to Desktop, and Scan to Network
Folder. Limits that can be selected are 50 MB, 150 MB,
and 300 MB. If the total size of the image files created by
scanning the original exceeds the limit, the image files
are discarded.
If you do not wish to set a limit, select [Unlimited].
Bcc Setting
Enable Bcc
Enable this setting if you wish to use Bcc delivery. When
the setting is enabled, the [Bcc] key will appear in the
image send address book screen.
Display Bcc Address on the Job Status Screen
This displays Bcc addresses on the job status screen
and address list tab.
Disable Scan Function
This is used to disable PC scan and USB memory scan.
When these modes are disabled, they are grayed out
when the mode is changed in the base screen.
Pre-Setting Mail Signature
A signature can be automatically appended to the end of
the body text of e-mail. This is convenient when it is a
corporate policy to append a specific signature at the
end of e-mail.
The mail signature to be appended is configured in the
Web pages. This setting simply enables or disables the
signature.
A default address can be stored that makes it possible to
transmit by simply pressing the [COLOR START] key or
the [BLACK & WHITE START] key without specifying an
address. When "Apply E-mail address of the user for
login." is selected, the e-mail address of the currently
logged-in user can be set as the default address.
If [Apply E-mail address of the user for login.] is selected,
the following settings can be configured.
Apply also for Fax/I-Fax Screen*
If this checkbox is set to , the default address (E-mail
address of the user that has logged in) is applied even
when the mode is switched to fax or Internet fax mode.
If this checkbox is set to , the default address (E-mail
address of the user that has logged in) is released when
the mode is switched to fax or Internet fax mode.
Allow cancel of the first entered address
If this checkbox is set to , the default address (E-mail
address of the user that has logged in) can be released
in the address list screen.
* Internet fax expansion kit is installed.
Disable selection of other address(es)
When the checkbox is selected , selection of other
addresses is prohibited.
This setting is linked to "Maximum Size of E-mail
Attachments" (page 7-87) in the Internet Fax Send
Settings.
When a broadcast transmission is performed that
includes both e-mail and Internet fax destinations, the
limit set in "Maximum Size of E-mail Attachments
(E-mail)" (page 7-85) is given priority.
This setting is linked to "Pre-Setting Mail Signature"
(page 7-87) in the Internet Fax Initial Settings.
Default Address Setting
• When this setting is enabled, the base screen
changes to scan mode.
• Only a single default address can be set for Scan to
E-mail, Scan to FTP, Scan to Desktop, and Scan to
Network Folder.
[Allow cancel of the first entered address] and [Disable
selection of other address(es)] can not be selected at
the same time.
To Next Page
Loading...
