Sharp MXC301W - Part Names and Functions; Exterior

1-2
BEFORE USING THE MACHINE
Contents
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Handle
Grasp them when moving the machine.
(2) Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.
☞ TURNING THE POWER ON AND OFF (page 1-14)
(3) Output tray extension
When you eject the paper, you can open to the outside.
(4) Automatic document feeder
This automatically feeds and scans multiple originals.
☞ PLACING THE ORIGINAL (page 1-39)
(5) Front cover
Open this cover to replace a toner cartridge.
☞ REPLACING THE TONER CARTRIDGES (page
1-49)
(6) Output tray
Output is delivered to this tray.
(7) Operation panel
This is used to select functions and enter the number of
copies.
☞ OPERATION PANEL (page 1-7)
BEFORE USING THE MACHINE
(4)(2) (5) (6) (7)(1) (3)