(8) USB connector (A type)
Supports USB 2.0 (Hi-Speed).
This is used to connect a USB device such as USB
memory to the machine.
For the USB cable, use a shielded cable.
(9) Side cover handle
Pull to open the side cover.
(10) Tray 1
This holds paper.
☞ TRAY SETTINGS FOR TRAY 1 TO 2 (page 1-33)
(11) Tray 2 (when a paper feed unit is installed)*
This holds paper.
☞ TRAY SETTINGS FOR TRAY 1 TO 2 (page 1-33)
(12) Bypass tray
Use this tray to feed paper manually.
When loading a large sheet of paper, be sure to pull out
the bypass tray extension.
☞
LOADING PAPER IN THE BYPASS TRAY (page 1-35)
* Peripheral device.
To Next Page
Loading...
