This section explains how to check the status of reserved transmission jobs and received faxes.
JOB STATUS SCREEN
The job status screen is displayed when the [JOB STATUS] key () on the operation panel is pressed. The job status
screen shows the status of jobs by mode. When the [JOB STATUS] key
() is pressed, the job status screen of the
mode that was being used before the key was pressed appears.
Reserved transmissions and received faxes are referred to as jobs here.
Example: Pressing the key in fax mode
CHECKING THE STATUS OF FAX
JOBS
The job status display is in the lower left corner of the touch panel. The job status display can be touched to display the job
status screen.
To Next Page
Loading...
Need help?
General
