Sharp MXC301W - Deleting a Document Stored for F-Code Polling Transmission

4-110
FACSIMILE
Contents
DELETING A DOCUMENT STORED FOR F-CODE
POLLING TRANSMISSION
When a document in an F-code memory polling box is no longer needed, follow the steps below to delete it.
A document in a memory box cannot be deleted while the document is being transmitted.
1
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the keys to switch through the screens.
(3) Touch the [Memory Box] key.
☞ SPECIAL MODES (page 4-69)
2
Touch the [Delete Data] key.
3
Touch the key of the F-code memory
polling box that has the document you
wish to delete.
appears in keys that have documents stored.
4
Touch the [Yes] key.
• The document is deleted and you return to the screen of step 3.
• Printing will begin.
You can touch the [Image Check] key to check the image in
the touch panel before deleting it. For information on the
image check screen, see "IMAGE CHECK SCREEN" (page
4-63).
To cancel the deletion...
Touch the [No] key. You will return to the screen of step 3 without deleting the document.
Polling Memory
Confidential
Reception
Data Check Delete Data
Data Store
Memory Box
Data Check
Exit
Memory Box - Delete Data
Back
1
2
Box 1
Box 3
Box 5
Box 7
Box 9
Box 11
Box 2
Box 4
Box 6
Box 8
Box 10
Box 12
Public Box
YesImage Check
No
Delete the data in the memory box?
Press [Image Check] to check data.