CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines or colored lines appear even after you have cleaned the document glass and automatic document feeder,
use the charger cleaner to clean the main charger.
1
Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (page 1-52),
release the toner collection container.
2
Grasp the green knob to release the lock
and gently remove the charger cleaner.
3
Gently push the charger cleaner all the way in.
4
Repeat step 2 and 3 with each of the
other main chargers.
5
Procedure of "REPLACING THE TONER COLLECTION CONTAINER" (page 1-52),
push the toner collection container into the machine.
• If this does not solve the problem, pull the knob out and push it back in 2 more times.
• When pulling and pushing the knob to clean the charger, pull and push the knob slowly from one end to the other.
• Touching the waste toner outlet or the toner collection container may soil your hands and clothes. Exercise caution when
cleaning the charger.
To Next Page
Loading...
Need help?
General
