JOB QUEUE SCREEN AND COMPLETED JOB SCREEN
The job status screen consists of two screens: the job queue screen, which shows reserved jobs and the job currently in
progress, and the completed jobs screen. To switch between the two screens, touch the job status screen selector key
((2) below).
(1) Mode select tabs
Use these tabs to select the job status screen of each
mode.
(2) Job status screen selector key
Touch this key to switch between the job queue screen
and the completed jobs screen.
(3) Job queue screen [Detail] key
This shows detailed information on a broadcast
transmission or serial polling job that is reserved or in
progress. Select the key of the desired job in the job
queue screen (6) and then touch the [Detail] key.
☞ CHECKING A RESERVED JOB OR THE JOB IN
PROGRESS (page 4-121)
(4) [Priority] key
Touch this key to give priority to a selected job.
☞ GIVING PRIORITY TO A RESERVED FAX JOB
(page 4-124)
(5) [Stop/Delete] key
Touch this key to stop or delete a selected job.
☞ CANCELING A FAX IN PROGRESS OR A
RESERVED FAX (page 4-123)
(6) Job queue screen
Jobs are shown as keys in the order they were reserved.
Each key shows information on a job and its current
status.
☞ Job key display (page 4-118)
(7) Completed jobs screen [Detail] key
This shows detailed information on the results of
completed broadcast transmission jobs, completed serial
polling jobs, and completed jobs that used the document
filing function. Select the key of the desired job in the
completed jobs screen (9) and then touch the [Detail]
key.
From the details screen, it is possible to resend the fax to
destinations to which transmission was not successful.
☞ CHECKING COMPLETED JOBS (page 4-122)
(8) [Call] key
Touch this key to retrieve and use a transmission or
reception job that was stored using the document filing
function.
(9) Completed jobs screen
This shows up to 99 completed transmission/reception
jobs. A description of each job and the result (status) are
shown.
Broadcast transmission jobs, serial polling jobs, received
fax forwarding jobs, and transmission/reception jobs that
used the document filing function are indicated as keys.
To Next Page
Loading...
Need help?
General
