Sharp MXC301W - Editing and Deleting a Memory Box; F-Code Memory Box

7-106
SYSTEM SETTINGS
Contents
F-Code Memory Box
This section explains how to store memory boxes for various types of F-code communication.
When the [F-Code Memory Box] key is touched, the following screen appears.
• [Add New] key
Use this to add a new memory box.
• List display
This displays a list of the currently stored memory
boxes. A memory box can be selected to open an
edit/delete screen for the memory box.
Storing a memory box
Touch the [Add New] key in the above screen to open a registration screen. A total of 100 F-code memory boxes for all
functions (polling memory, confidential, and relay broadcast) can be stored.
For information on the settings, see "Settings" (page 7-107).
Editing and deleting a memory box
A memory box can be selected from the list in the above screen to open an edit/delete screen for the box.
For information on the settings, see "Settings" (page 7-107).
Delete a memory box with the [Delete] key.
System Settings
F-Code Memory Box
Box 3
Box 1
Sort
Polling Memory
Back
Add New
Box 5
Box 7
Box 9
Box 2
Box 4
Box 6
Box 8
Box 10
2
1