• The following functions cannot be used with direct transmission:
Program, Timer Transmission, Card Shot, Job Build, Polling Memory, Original Count, File, Quick File, Memory Box,
2-Sided Original Scanning, Global Address Search
• Resending will not take place when a direct transmission is not successful due to a communication error or other reason.
• If a fax transmission is already in progress when the direct transmission operation is performed, the direct transmission will
wait until the previous transmission is finished. When the previous transmission is completed, the direct transmission will
begin. While the direct transmission is waiting, the [JOB STATUS] key ( )
can be touched to display the job status
screen. No other operations are possible.
☞CHECKING THE STATUS OF FAX JOBS (page 4-116)
To Next Page
Loading...
Need help?
General
