Many nonsense
characters are printed.
Is your computer or the machine in an
unstable state?
Cancel printing, restart your computer and the
machine, and try printing again.
If little free space remains in the memory or hard drive of
your computer, or many jobs have been spooled on the
machine and it has little free memory remaining, printed
text may turn into nonsense characters.
To cancel printing
Windows:
Double-click the printer icon that appears at the lower
right of the task bar and click "Cancel All Documents"
(or "Purge Print Documents") in the [Printer] menu.
Macintosh:
Double-click the name of the machine in the printer
list, select the job that you wish to delete, and delete
it.
At the machine:
Press the [JOB STATUS] key ( )
on the operation
panel, touch the [Print Job] tab to change the screen,
touch the key of the print job that you wish to delete,
and touch the [Stop/Delete] key. A message appears
to confirm the cancelation. Touch the [Yes] key.
If nonsense characters are still printed after restarting,
ask your administrator to lengthen the timeout setting of
"I/O Timeout" in the system settings (administrator).
âžž System Settings (Administrator) > "Printer Settings" >
"Interface Settings" > "I/O Timeout"
If nonsense characters are still printed after taking the
above measures, remove and then reinstall the printer
driver.
Problem Point to check Solution
To Next Page
Loading...
Need help?
General
