Siare Morpheus Series - Page 178

Alarms: AD.A module
User’s Manual, DU3310103-MRI / rev.3 - 02.05.2019
8-13
How setting and/or modify the Vt parameter (Vte alarm)
Keep pressed for at least 5 seconds the key aside
the Vt parameter
The display shows the DEFAULT parameter referred
to the Vte alarm (
L 50 ) or a value previously set
The DEFAULT parameter (
L 50
) flashes
Turn clock-wise (counter-clockwise) to increase (decrease) the
value of the alarm parameter [ Vte ]
The DEFAULT parameter (
L 20
) flashes
Press the knob to confirm the value
The value of parameter Vt (
L 20
) DOES NOT flash