Siare Morpheus Series - Setting of Alarm Parameters

Alarms: AD.A module
8-12 MORPHEUS MRI
8.6 Setting of alarm parameters
How setting and/or modifying the Pmax parameter
• Press the key aside the Pmax parameter
• The value of the parameter (
30
) will start flashing
•
Turn clock-wise (counter-clockwise) to increase (decrease) the
parameter value [Pmax ].
• The parameter value (
40
) flashes.
•
Press the knob confirm the value.
• The value of
Pmax parameter ( 40 ) DOES NOT flashes.
VAC : the alarm is activated at set value of Pmax
PVC : it is activated when the Pmax pressure limit set is overcome of
5 cmH
2
O