Siare Morpheus Series - Correct Operation

Introduction
User’s Manual, DU3310103-MRI / rev. 3 - 02.05.2019 1-5
1.4 Correct operation
For correct and complete functioning, the MORPHEUS LT/MRI anaesthesia unit must
be:
• connected to the air an
d oxygen outlets of the medical gas distribution system or
of the cylinders; the compressed air can also be supplied by a medical air
compressor (optional);
• correctly connected to the patient circuit;
• connected to a mains power supply with the same voltage
as specified on the
identification plate;
•
correctly connected to all accessories and equipment necessary for the
operation.
The connections with main power supply, as well as connections
with medical gas distribution system must be effected accord
ing to
the indications contained in the present user’s manual.
For its employ the MORPHEUS LT/MRI anaesthesia unit has been designed and
made to guarantee full quality of the product and its components, in order to ensure
the maximum reliability of the unit for the patient and user safety.
This user’s manual explains how to use the MORPHEUS LT/MRI anaesthesia unit
and how to carry out simple maintenance.
To ensure the best performance of the MORPHEUS LT/MRI anaesthesia unit periodic
maintenance of the v
entilator by qualified technical personnel is recommended. For
further information, contact SIARE ENGINEERING INTERNATIONAL GROUP s.r.l.
SIARE ENGINEERING INTERNATIONAL GROUP
s.r.l. recommends careful reading
of this manual and the relative labels before o
perating the ventilator or carrying out
any maintenance.