Maintenance
User’s Manual, DU3310103-MRI / rev.3 - 02.05.2019
10-7
10.2.4 Cleaning, disinfection and sterilisation table
Component Procedure Notes
Outer casing Use a moistened disposable cloth with
neutral detergent or a chemical substance
or the like. Use water to remove any
remaining traces of chemical.
The operator may use disinfectants (e.g.
Buraton 10 F, diluted according to the
manufacturer’
s instructions; VPRO 60C°) to
clean the components.
Disinfectants based on the following
substances can cause damage:
• halogen-releasing compounds;
• strong organic acids;
• oxygen-releasing compounds.
Remove any dust from the surfaces or in
openings using a vacuum cleaner or a soft
cloth.
Make sure that no
sprays or liquids
penetrate inside the
equipment and the
connectors.
Screen See above Do not use cloths or
sponges that could
scratch the surface.
To avoid damaging the labels and outer surfaces of the
ventilator, use only the chemical substances listed.
To Next Page
Loading...
