Siare Morpheus Series - Verification Activity - SELF TEST

Preparation to use
User’s Manual, DU3310103-MRI / rev.3 - 02.05.2019
6-29
6.4.1 Verification activity - “ SELF TEST “
Position the main power supply main switch in position
I (ON) ;
anaesthesia unit start-up
On the ventilator front panel, verify the electric power supply led;
green led on.
Keep STAND-BY / ON-OFF button pressed for a few seconds to turn
the anaesthesia unit on.
The MORPHEUS LT/MRI anaesthesia unit “ SELF TEST “ phase
starts.